Peter.Howard
Nov 13, 09:23 PM
you had my curious about the answer there to that,
I found this on google:
http://discussions.info.apple.com/thread.jspa?threadID=2025553&tstart=60
Sounds like you have system 6
and you need an 800k boot floppy
that shift key command only worked on system 7 onwards
I found this on google:
http://discussions.info.apple.com/thread.jspa?threadID=2025553&tstart=60
Sounds like you have system 6
and you need an 800k boot floppy
that shift key command only worked on system 7 onwards
roxor
Apr 4, 08:33 AM
Hi,
I know there are many threads on it. But nowhere have I been able to find a clear answer as to whether it is possible or not to perform the following:
- I have an internet box from which I get the connection to Internet
- I have a third-party (Linksys) router that does my routing and my wifi
- My home is built in a way so that I cannot get wifi everywhere (possibly because the Linksys has crappy range), though I think one extra spot would help
Can I use an Airport Express device to extend my Linksys' wifi coverage?
Many threads exist but all contradict on whether it is possible or not to extend non-Apple-based networks with an Apple device.
If not, does the following architecture work?:
- Linksys still there to be doing my wired-ethernet routing
- One Airport Express device plugged to the switch of the Linksys and that delivers wifi
- A second Airport Express plugged in another room that only extends wifi provided by the first one
If this still is not possible, what would be? By now, if you're still reading, you must have gotten a clue of what I am trying to achieve ;)
The thing I'd like to avoid is to have to replace the Linksys by the Airport Extreme that could do my wired-Ethernet routing and still have to get an express one for range extension...
Thank you.
I know there are many threads on it. But nowhere have I been able to find a clear answer as to whether it is possible or not to perform the following:
- I have an internet box from which I get the connection to Internet
- I have a third-party (Linksys) router that does my routing and my wifi
- My home is built in a way so that I cannot get wifi everywhere (possibly because the Linksys has crappy range), though I think one extra spot would help
Can I use an Airport Express device to extend my Linksys' wifi coverage?
Many threads exist but all contradict on whether it is possible or not to extend non-Apple-based networks with an Apple device.
If not, does the following architecture work?:
- Linksys still there to be doing my wired-ethernet routing
- One Airport Express device plugged to the switch of the Linksys and that delivers wifi
- A second Airport Express plugged in another room that only extends wifi provided by the first one
If this still is not possible, what would be? By now, if you're still reading, you must have gotten a clue of what I am trying to achieve ;)
The thing I'd like to avoid is to have to replace the Linksys by the Airport Extreme that could do my wired-Ethernet routing and still have to get an express one for range extension...
Thank you.
dylangurl21
Feb 29, 04:33 PM
Does the dent nulify the applecare? Will send paypal as soon as I find out for sure that these are stil FS>.wouldnt want to send Paypal without knowledge product is still available.
macboy62
Oct 25, 11:16 PM
Hi I am using 10.5 in the Ginza store, there are 10 people in the que outside at 1:15 pm. I will join them soon. :)
more...
soundman2385
Oct 25, 10:32 PM
My friend and I are going in the morning to scout out what's happening, but it might just be right out in front of the store. We are planning on getting there around 4 or so probably.
Horrortaxi
Aug 26, 09:43 PM
Originally posted by nagromme
An interesting comparison.
Thanks. I scared myself a little because, to me anyway, it seemed dead on. Can any other switchers out there relate?
An interesting comparison.
Thanks. I scared myself a little because, to me anyway, it seemed dead on. Can any other switchers out there relate?
more...
aarond12
Jan 25, 05:46 PM
Since no examples were given, I have to say: USE COMIC SANS FOR EVERYTHING. :eek:
Seriously, each document/logo/presentation needs deep consideration of the audience, corporate branding, etc., to choose a font. This usually isn't a "throw a dart and choose a font" type of thing...
Seriously, each document/logo/presentation needs deep consideration of the audience, corporate branding, etc., to choose a font. This usually isn't a "throw a dart and choose a font" type of thing...
daneoni
Apr 22, 04:31 PM
I had my EMP primed and ready.
more...
samdweck
Oct 6, 08:56 PM
Originally posted by Spock
I remember once all I said in a post was "Yes" and I could not sleep for day's
is posting things that are about two or three sentences and not COMPLETELY relative to the topic spam? i hope not... b/c i try my best to make my posts sensibel!
I remember once all I said in a post was "Yes" and I could not sleep for day's
is posting things that are about two or three sentences and not COMPLETELY relative to the topic spam? i hope not... b/c i try my best to make my posts sensibel!
Dmac77
Dec 29, 06:02 PM
Well I just broke down and bought the Kinect bundle and spent $100 more than I wanted to, but oh well. I'll give it a shot and if I hate it as much as I think I will I'll just sell it or something.
I still hate bundles.
-Don
I still hate bundles.
-Don
more...
treebark7182
May 4, 10:45 AM
I've sold my macbook and had a 128gb ssd in it that I pulled. I'm hoping to get a thunderbolt enclosure and using it as an external boot drive. with thunderbolt it shouldnt hold it back at all I dont think.
Morn
Dec 21, 08:25 AM
:confused: Victim of a bushfire?
more...
martynov
Apr 14, 08:36 AM
Answers:
Will the proximity sensor work?
It depends, there are companies who know how to fix it and there are companies who do not. I have the five star shaped screws and in most cases with these screws, the proximity usually never works. Mine on the other hand works flawlessly so once again do your research and see which company can resolve that issue.
Will the earpiece work?
Im not even sure why people are heaving earpiece problems, i was watching the whole process of my iPhone being converted (Asking questions, being nosy, and annoying) and there nothing to do with the ear speaker being connected, removed, or disconnected. I do see something that might be a problem, the new speaker mesh i have in my white kit has glue on it so it might clog it up later on with dust.
Are these faulty in all white conversions?
You need to do your research and you have to really go into detail with each of these companies. If i was you, i would not trust anything below $200 unless its a kit.
How bad is the camera really?
I think over the time that i have been on these forums, i have heard so many issues with the camera and primarily because people forget to remove a film on the back or on the camera lens it self. Camera should not be an issue unless you're missing the flash diffuser, if you miss that then most likely you will have white bleed through. The only way a part can be missing a diffuser is if its really cheap quality.
Hope this helps
Will the proximity sensor work?
It depends, there are companies who know how to fix it and there are companies who do not. I have the five star shaped screws and in most cases with these screws, the proximity usually never works. Mine on the other hand works flawlessly so once again do your research and see which company can resolve that issue.
Will the earpiece work?
Im not even sure why people are heaving earpiece problems, i was watching the whole process of my iPhone being converted (Asking questions, being nosy, and annoying) and there nothing to do with the ear speaker being connected, removed, or disconnected. I do see something that might be a problem, the new speaker mesh i have in my white kit has glue on it so it might clog it up later on with dust.
Are these faulty in all white conversions?
You need to do your research and you have to really go into detail with each of these companies. If i was you, i would not trust anything below $200 unless its a kit.
How bad is the camera really?
I think over the time that i have been on these forums, i have heard so many issues with the camera and primarily because people forget to remove a film on the back or on the camera lens it self. Camera should not be an issue unless you're missing the flash diffuser, if you miss that then most likely you will have white bleed through. The only way a part can be missing a diffuser is if its really cheap quality.
Hope this helps
galstaph
Dec 21, 08:44 PM
Definitely simplify it, too many concepts competing for attention.
Try designing around one main concept, use fewer fonts and font sizes.
Do not clutter it up with all the leaves and doodads... it just makes it look too busy and therefore unappealing.
Simple simple simple, especially as you are just starting out. Clarify your most important concept, sketch it out with a pencil, rework it until it feels right. Also look on the net at ads that appeal to you, what did they do that works for you, how can you incorporate those layout/concept ideas into your own work to make it better? Take all that and your sketches work them together and then make it digital and come back to us, I'll bet dollars to donuts it'll be a lot nicer and more coherent and cohesive, just keep at it:).
BTW, the leaves make me think I can recycle my compost/tree leaves there as well, if this is for electronics, I think you can leave them out (no pun intended)
Try designing around one main concept, use fewer fonts and font sizes.
Do not clutter it up with all the leaves and doodads... it just makes it look too busy and therefore unappealing.
Simple simple simple, especially as you are just starting out. Clarify your most important concept, sketch it out with a pencil, rework it until it feels right. Also look on the net at ads that appeal to you, what did they do that works for you, how can you incorporate those layout/concept ideas into your own work to make it better? Take all that and your sketches work them together and then make it digital and come back to us, I'll bet dollars to donuts it'll be a lot nicer and more coherent and cohesive, just keep at it:).
BTW, the leaves make me think I can recycle my compost/tree leaves there as well, if this is for electronics, I think you can leave them out (no pun intended)
more...
Peyote
Dec 20, 05:58 PM
Dynamic Range was one thing I was about to mention. I don't know a lot about 35MM only scanners, but I know that when I'm looking for a flatbed scanner, I won't buy anything with a DMax under 3.4. Even 3.4 is pushing it IMHO, and really 3.8 is where it's at.
That is an often overlooked specification. It basically tells you how wide of a range of contrast it can scan. The higher the better.
That is an often overlooked specification. It basically tells you how wide of a range of contrast it can scan. The higher the better.
VanMac
Sep 23, 01:21 PM
Cause it's my birthday ;)
more...
h0e0h
Feb 8, 06:41 PM
There's a new mx1000?
Maybe my post was a little misleading... i meant Logitech's newest input device the mx1000... my bad... and also i'd like to see some pics or something w/ the new FCP Keyboard in them... and to hear about how it is...
Maybe my post was a little misleading... i meant Logitech's newest input device the mx1000... my bad... and also i'd like to see some pics or something w/ the new FCP Keyboard in them... and to hear about how it is...
MayPeng
Apr 20, 02:22 AM
Does it show up in HID Explorer ( http://developer.apple.com/library/mac/#samplecode/HID_Explorer)? Handy app if you're working with HID devices/API.
Can't show up in the HID_Explorer.Whether driver doesn't support? But my device is hid type device.
Can't show up in the HID_Explorer.Whether driver doesn't support? But my device is hid type device.
shartypants
Dec 24, 11:17 AM
I never use the web interface for MobileMe, but its nice to see them polishing it in the event I ever do :)
iphoner2010
Jun 19, 10:08 AM
showed up at 8. not many in line. the one lady in the orange said that I couldn't get it because I wasn't the primary account name (even though the primary doesn't even use AT&T, it's my dad and he just gets the bill), so I called AT&T and they told apple that they had to sell me one because I am authorized on the account. Everything else went smoothly. I thought that the Starbucks Coffee and water were nice touches for those who had to wait forever outside. I ended up waiting about 1 hr which I didn't think was terrible.
however, I was angered at the fact that I brought my apple in-ear headphones in to get replaced because they stopped working after day 4 of having them (I didn't damage them) and they said, "we don't care about that right now...you'll have to come back after tomorrow." I understand that they are busy, but A) they sold me a faulty product that I want replaced B) I'm a valuable customer C) It's a huge inconvenience for me to return to Easton to take care of it.
:apple:
however, I was angered at the fact that I brought my apple in-ear headphones in to get replaced because they stopped working after day 4 of having them (I didn't damage them) and they said, "we don't care about that right now...you'll have to come back after tomorrow." I understand that they are busy, but A) they sold me a faulty product that I want replaced B) I'm a valuable customer C) It's a huge inconvenience for me to return to Easton to take care of it.
:apple:
theipodgod16
Jun 21, 01:29 PM
I'll be there!
paolo-
Mar 5, 02:12 PM
Basically, it doesn't sound too good. It might sound better with high impedance cans. I have some akg k77 and the output on my macbook sound pretty bad compared to my external soundcard.
I don't think you'll get trouble with getting enough volume out of it with high impedance headphones as the output can go ridiculously high so I don't think that would be a problem even with high impedance cans.
I don't think you'll get trouble with getting enough volume out of it with high impedance headphones as the output can go ridiculously high so I don't think that would be a problem even with high impedance cans.
AJ Muni
Sep 19, 05:23 PM
I need to buy a monitor for a powerbook and saw a few companies selling new, in the box 17" Apple Studio Displays online. The price is about $450. I have always loved the look of that monitor, but am wondering how well they stack up with today's monitors. In addition, I believe for the same price I could get 19" - so I am torn. Any advice? :confused:
where did you find it?? im looking for one...
where did you find it?? im looking for one...
alecgold
Apr 7, 05:13 AM
Same here in Holland, awful service and always pushing the dates if they haven't got it in stock. Within a week might end up being within 6 months. perhaps.
0 comments:
Post a Comment