Alabaman
03-26 07:36 PM
Proves that we are not cheap labor and we are not driving the salaries down. I know citizens in my position in my company are not being paid more than me. We had waited for three months to fill a position and we have to compromise in the end because we could not get enough resumes to go through.
...proves to who?? Would we be just making ourselves happy??
...proves to who?? Would we be just making ourselves happy??
speddi
09-14 10:20 AM
Thank you but the address listed is to Chicago. I will be sending to Texas Service Center. I couldnt find that address.
dreamworld
05-05 12:24 PM
Hi
I was under the impression that there would be some talks about the discussed bills on floor this week.I see no signs of any debate or any discussion.I have some read some posts saying that nothing would happen this year. This really confuses me as I had & I think many of us had hopes that coming weeks would decide something.
I would appreciate if someone could give everyone very clear picture of what going on ?
Thanks
GCcomesoon
If you think out-off-box.... guess what? If US-govt wants to give employment-based-green card based on priority date. Then there won�t be any new immigration law in place without clearing Backlog center cases/queue and I140.
So what... As per the labor department web site, the DOL needs another 17/18 months to clear all pending labors.
I guess any new bill to become law will take another 19 to 24 months. Keep your spirit going to support the best immigration-bill.
My 2 cents.
I was under the impression that there would be some talks about the discussed bills on floor this week.I see no signs of any debate or any discussion.I have some read some posts saying that nothing would happen this year. This really confuses me as I had & I think many of us had hopes that coming weeks would decide something.
I would appreciate if someone could give everyone very clear picture of what going on ?
Thanks
GCcomesoon
If you think out-off-box.... guess what? If US-govt wants to give employment-based-green card based on priority date. Then there won�t be any new immigration law in place without clearing Backlog center cases/queue and I140.
So what... As per the labor department web site, the DOL needs another 17/18 months to clear all pending labors.
I guess any new bill to become law will take another 19 to 24 months. Keep your spirit going to support the best immigration-bill.
My 2 cents.
coolngood4u80
12-09 10:51 AM
Its very close ...it may pass the cloture vote..
more...
mundada
07-11 12:19 PM
Called Sarah and mine is at 3 pm. She needs one more.
indrachat_75
02-20 10:19 PM
It is next week, correct ?
Indraneel
Indraneel
more...
reddymjm
10-20 10:30 AM
I understand your frustration, but its like holding IV responsible for getting your GC - that does not seem right.
Contributing now is important; and after getting gc's, its equally important to support the people who are still stuck in the process.
My First donation was in Jan 2006. The latest one was, 100$ for the Washington meet this year. And I had a lot more in between. This will be just on top of it. How is my GC is related to IV. I dont think I am holding anybody responsible for it.
Contributing now is important; and after getting gc's, its equally important to support the people who are still stuck in the process.
My First donation was in Jan 2006. The latest one was, 100$ for the Washington meet this year. And I had a lot more in between. This will be just on top of it. How is my GC is related to IV. I dont think I am holding anybody responsible for it.
waitingmygc
10-12 07:08 PM
Please ask an attorney.
why?
If H1B extension is pending and going out of country even if travelling with valid AP, then there are chances that pending H1B extension denied by USCIS.
I advice you to consult a good attorney.
why?
If H1B extension is pending and going out of country even if travelling with valid AP, then there are chances that pending H1B extension denied by USCIS.
I advice you to consult a good attorney.
more...
transpass
03-23 05:07 PM
Hello gurus,
need little help from you guys. Right now i am on H1b.
I am about to file my Family based I-485, I-130, I-765, I-131. on all these forms they are asking for A# ( Alien Registration Number).
I was on F1 visa before. so i have one expired EAD card which i got during my OPT in 2005. this card has a A#.
so should i put this A# on all forms( I-485,I-130,I-765,I-131) or leave it blank.???
H1bdude1
As far as I know, the OPT A# is different from what you will get from filing 140. Once you receive 140 approval notice, it should have the A# which you can use on 485...If you don't have one or don't know, leave it blank...
need little help from you guys. Right now i am on H1b.
I am about to file my Family based I-485, I-130, I-765, I-131. on all these forms they are asking for A# ( Alien Registration Number).
I was on F1 visa before. so i have one expired EAD card which i got during my OPT in 2005. this card has a A#.
so should i put this A# on all forms( I-485,I-130,I-765,I-131) or leave it blank.???
H1bdude1
As far as I know, the OPT A# is different from what you will get from filing 140. Once you receive 140 approval notice, it should have the A# which you can use on 485...If you don't have one or don't know, leave it blank...
gc_seeker_2001
02-01 12:31 AM
Thanks everyone for the feedbacks. My EB2 I40 has not been approved, as it was filed only a month back.
From your responses it seems like sticking with EB-3 is better right?
When I checked with my lawyer (current company) they mentioned that, along with EB-2 I40 application, they have put a request to adjudicate the pending AOS based on the earliest priority date (EB2). They are also planning to do the same after, EB2 I-140 gets approved. I didn't expect them to do this along with I-140 filing. Had they waited till I-140 approval, they could have made a better decision to stick with EB3 or put a request to adjudicate AOS based on EB2 depending upon the state of the priority dates at that time :(
I am planning to check with the lawyer, if they can withdraw the EB2 I-140.
From your responses it seems like sticking with EB-3 is better right?
When I checked with my lawyer (current company) they mentioned that, along with EB-2 I40 application, they have put a request to adjudicate the pending AOS based on the earliest priority date (EB2). They are also planning to do the same after, EB2 I-140 gets approved. I didn't expect them to do this along with I-140 filing. Had they waited till I-140 approval, they could have made a better decision to stick with EB3 or put a request to adjudicate AOS based on EB2 depending upon the state of the priority dates at that time :(
I am planning to check with the lawyer, if they can withdraw the EB2 I-140.
more...
nsrinivas
09-30 11:33 PM
I think was just in anxiety !!!. My wife recieved FP notice around 5 days after I recieved. We both have appointment on same day and same time.
So bottom line even though it is frustrating , I think the best solution is to just wait :)
So bottom line even though it is frustrating , I think the best solution is to just wait :)
Pasquale
01-14 09:49 AM
Good gosh :D
more...
Googler
02-20 08:15 PM
Just food for thought. At this time there are 28600 EB1 visas. Most in the EB1 category are current or pretty close to it.
As a matter of fact, EB-1 annual limit = 28.6% of 140K = 40,040 and it has been current for a while.
As a matter of fact, EB-1 annual limit = 28.6% of 140K = 40,040 and it has been current for a while.
Filipo
07-11 11:46 AM
they might be annoyed...and the message thats represent the flowers will become meaningless...
more...
chi_shark
04-28 11:29 AM
"approvable" is the right term.
what if there is an rfe on the 140 when the case is not approved (but is approvable) and the employee has already quit? wont the 140 sponsor have to respond saying that employee nada exists? so, even though "approvabe" may be the right legalese, isnt "approved" more practical and relevant for us as beneficiaries.
what if there is an rfe on the 140 when the case is not approved (but is approvable) and the employee has already quit? wont the 140 sponsor have to respond saying that employee nada exists? so, even though "approvabe" may be the right legalese, isnt "approved" more practical and relevant for us as beneficiaries.
resident1374
02-03 09:59 AM
Thank you for your help. I will definitely contact an attorney for my case. Hopefully, I will receive an approval without any hassle.
more...
raysaikat
08-15 11:20 AM
I am not sure I understand. My wife resides in Mumbai. She had her h1 stamped there some time back around 5 years. That h1 she used and is gone now. Now she applied for h1 in fresh qupta since she was out of us for more than one year. Right now so where should we go for stamping. Shes in us with me on h4. Can we go to canada?
Yes, you can go to canada for visa stamping. Note however that the canadian US consulate might require "security clearance" and then your wife will be stuck in canada, typically for months. Although chances are slim, such events do happen, and therefore it is advisable to go to the home country (non-home country consulates issue 221(g) more frequently) or at least to a place where your wife can afford to stay for months.
Yes, you can go to canada for visa stamping. Note however that the canadian US consulate might require "security clearance" and then your wife will be stuck in canada, typically for months. Although chances are slim, such events do happen, and therefore it is advisable to go to the home country (non-home country consulates issue 221(g) more frequently) or at least to a place where your wife can afford to stay for months.
anyway
01-25 06:36 PM
You can add a MouseLeftButtonDown event to pretty much any element! Just select and use the Events tab to set your event handler name: http://www.kirupa.com/net/creating_simple_wpf_gui_app_pg5.htm
Both Blend and VS will auto-generate the event handler where you can insert some code :)
Thanks. I actually figured it out, sort of.
So what I did was drag and drop the icon into my project then turned the icon into a control using the 'Make into control' option (right click option); selected Button from the list and left everthing else as is. From here, I selected button from the tab (says [Button]) under the project name. example: mainpage.xmal).
So basic what this does is overlay the icon image with an actual button control.
Moving on.
I then selected the button (icon image) in my project and in the properties panel (on the right) under 'Common Properties' removed the word "button" from the 'Content' label.
Switched to event view (it's the rectangle with the lighting bolt -- top right) and in the box next to 'Click' gave it a meaningful name, i.e. query_Click or query or something. I think after this the MainPage.xaml.cs should open.
Both Blend and VS will auto-generate the event handler where you can insert some code :)
Thanks. I actually figured it out, sort of.
So what I did was drag and drop the icon into my project then turned the icon into a control using the 'Make into control' option (right click option); selected Button from the list and left everthing else as is. From here, I selected button from the tab (says [Button]) under the project name. example: mainpage.xmal).
So basic what this does is overlay the icon image with an actual button control.
Moving on.
I then selected the button (icon image) in my project and in the properties panel (on the right) under 'Common Properties' removed the word "button" from the 'Content' label.
Switched to event view (it's the rectangle with the lighting bolt -- top right) and in the box next to 'Click' gave it a meaningful name, i.e. query_Click or query or something. I think after this the MainPage.xaml.cs should open.
shana04
07-30 01:37 AM
Thanks a lot for sharing good info.
nomi
09-21 04:24 PM
If you have master degree and you are from india then there is long long wait time.
m306m
04-15 02:23 PM
My wife has ITIN till last year and we filed jointly. This year she has a social security number and we filed using social security number. Return was rejected by IRS saying that my wife's last year's AGI is wrong. Has anyone run into this ? What was the resolution ?
This happened to me as well. The efile will fail because of the switch from ITIN to SSN. I then did not efile my taxes instead mailed it to the IRS. Next year you should be able to efile since the record is straight with the IRS.
This happened to me as well. The efile will fail because of the switch from ITIN to SSN. I then did not efile my taxes instead mailed it to the IRS. Next year you should be able to efile since the record is straight with the IRS.
0 comments:
Post a Comment