syedajmal
03-31 04:14 PM
Speeding is a misdemeanor in some states and can cause a false alarm. Just recollect to see if you can recollect anything where you ran into the law even something minor??
wallpaper for this make-up tutorial.
gcisadawg
03-25 04:52 PM
voted for vamsi's qn....
gultie2k
07-07 01:42 PM
Ganguteli and Saxena...
Even though your intention may be right...the means is not. Hoping for bad of others to get help is SICK!!
Even though your intention may be right...the means is not. Hoping for bad of others to get help is SICK!!
2011 images Makeup Tutorial: Hot
RSM1444
08-06 12:54 PM
looks interesting.
more...
cox
May 21st, 2007, 10:27 AM
Sounds like you found the "sensor", really a filter or glass over the sensor. When you remove the lens, you see the mirror. Put the camera in bulb mode and lock the shutter open, and that's the "sensor". Ensure that you have plenty of battery power (or are hooked up to the AC/DC adapter) before you stick anything into the sensor cavity. If the shutter closes while you have something in the cavity, the shutter will break, and you will need an expensive repair.
I have to clean my cameras often, since I shoot outdoors and change lenses many times a day. I have found that compressed air takes care of most problems, and a $10 bulb, like Mark mentioned, is the best way to go for field work. If you are willing to put a little more $$ into it, get an oil-less diaphragm compressor for an airbrush, ~$100. The other nice thing about air is that you don't put anything in the shutter cavity.
DO NOT use "canned air", these little cans with compressed air in them. They contain isobutane and other hydrocarbon propellants which can "spit" out of the can and leave spots on the sensor that will require a liquid cleaning to remove.
Liquid cleaning is more complicated. The Eclipse solution is (I have heard, I don't use it...) clean methanol. A lot of people use these with 'pec' pads with success. I use clean, high grade isopropanol, electronics swabs, and follow up with distilled DI water and the air compressor. This is a delicate process that I don't recommend experimenting with. If you want to learn how to do this, find someone who is willing to tech you using his camera. ;) Mark probably gets his money's worth from the camera shop. The only issue is finding a good shop.
I have to clean my cameras often, since I shoot outdoors and change lenses many times a day. I have found that compressed air takes care of most problems, and a $10 bulb, like Mark mentioned, is the best way to go for field work. If you are willing to put a little more $$ into it, get an oil-less diaphragm compressor for an airbrush, ~$100. The other nice thing about air is that you don't put anything in the shutter cavity.
DO NOT use "canned air", these little cans with compressed air in them. They contain isobutane and other hydrocarbon propellants which can "spit" out of the can and leave spots on the sensor that will require a liquid cleaning to remove.
Liquid cleaning is more complicated. The Eclipse solution is (I have heard, I don't use it...) clean methanol. A lot of people use these with 'pec' pads with success. I use clean, high grade isopropanol, electronics swabs, and follow up with distilled DI water and the air compressor. This is a delicate process that I don't recommend experimenting with. If you want to learn how to do this, find someone who is willing to tech you using his camera. ;) Mark probably gets his money's worth from the camera shop. The only issue is finding a good shop.
krishnam70
07-08 02:37 PM
Please visit www.helpvinay.org to get furthur details.
Initially you need to go to a drive and register. You have to fill a form and give a simple swab test (Give saliva sample) . Takes 5 minutes.
Then you will get added to a national registry.
Alternately you can also register online if you not in a metropolitan area. We are having lot of drives right now in New York,New jersey,DC areas.
All details on www.helpvinay.org
If you have any more questions, I can answer
I just got this info from here and I will be going in to the drive today in my city..I have called up all my friends and informed them about it and they will be going in too. hopefully somebody will match.
Initially you need to go to a drive and register. You have to fill a form and give a simple swab test (Give saliva sample) . Takes 5 minutes.
Then you will get added to a national registry.
Alternately you can also register online if you not in a metropolitan area. We are having lot of drives right now in New York,New jersey,DC areas.
All details on www.helpvinay.org
If you have any more questions, I can answer
I just got this info from here and I will be going in to the drive today in my city..I have called up all my friends and informed them about it and they will be going in too. hopefully somebody will match.
more...
redelite
08-27 03:06 PM
...I feel left out here.. what does SMH stand for?
2010 80s makeup tutorial.
kanakabyraju
08-31 01:34 PM
I filed AOS during July 07 fiasco. It has been more than 15 months since the first fingerprint but I have not yet received 2nd fingerprint notice. I noticed a SLUD in May/09 but no notice. Anybody else out there who filed in July but don't have second fingerprint notice yet?
Best thing is to apply AP online. I did the same and got the FP notice 2nd time. Planning to do it again this year end.
kanaka
Best thing is to apply AP online. I did the same and got the FP notice 2nd time. Planning to do it again this year end.
kanaka
more...
danu2007
10-09 09:11 PM
Please go to below thread and update the list with your details.
http://immigrationvoice.org/forum/showthread.php?t=5935
http://immigrationvoice.org/forum/showthread.php?t=5935
hair 80s makeup trends,
gcdreamer05
09-01 09:37 AM
hi sharadara,
Try to talk to someone in spain consultate or someone who knows spain visa rules.
For example a person on h4 visa in US cannot work, so it depends on what visa type you are going to be going for in Spain and does that visa type allow you to work.
If it allows you to work, then you can do telecommute and work and make money.
So the country of residence and your visa type dictates the same.
This forum has lot of folks who work in US/Canada, but not many from spain, i would try googling for some other forums or contact the spain consulate for help.
Thanks
Dreamer05
Try to talk to someone in spain consultate or someone who knows spain visa rules.
For example a person on h4 visa in US cannot work, so it depends on what visa type you are going to be going for in Spain and does that visa type allow you to work.
If it allows you to work, then you can do telecommute and work and make money.
So the country of residence and your visa type dictates the same.
This forum has lot of folks who work in US/Canada, but not many from spain, i would try googling for some other forums or contact the spain consulate for help.
Thanks
Dreamer05
more...
lee.cook
May 20th, 2007, 12:09 PM
Hello,
OK so today I went out with my father to take some images in the countyside, got home, looked on the PC, and there is dust spots in the image!
So I took a few more images of the sky (this seems to show up easily) and its still there.
I took my lens off, and had a look in and there is loads off dust, I tried using little brush to get some off the dirt off, but its still there.
I feel stupid about this, but, where is the sensor ? I can only see 2 mirrors, one I believe is the focus mirror.
I found another mirror behind another mirror and believe its the sensor but unsure.
I read that cleaning the mirrors has nothing to do with the output off the final image.
This is what my image dust looks like.. http://img444.imageshack.us/img444/886/dsc1723hl7.jpg
http://img444.imageshack.us/img444/6991/dsc1208am4.jpg
As you can see, there is a dust spot in the upper top half off the picture.
Could anybody recommend any cleaning solutions for this, I really need my sensor clean by Saturday as the start of the Isle of Man TT practice is here :)
I can provide pictures if needed, thanks for reading.
OK so today I went out with my father to take some images in the countyside, got home, looked on the PC, and there is dust spots in the image!
So I took a few more images of the sky (this seems to show up easily) and its still there.
I took my lens off, and had a look in and there is loads off dust, I tried using little brush to get some off the dirt off, but its still there.
I feel stupid about this, but, where is the sensor ? I can only see 2 mirrors, one I believe is the focus mirror.
I found another mirror behind another mirror and believe its the sensor but unsure.
I read that cleaning the mirrors has nothing to do with the output off the final image.
This is what my image dust looks like.. http://img444.imageshack.us/img444/886/dsc1723hl7.jpg
http://img444.imageshack.us/img444/6991/dsc1208am4.jpg
As you can see, there is a dust spot in the upper top half off the picture.
Could anybody recommend any cleaning solutions for this, I really need my sensor clean by Saturday as the start of the Isle of Man TT practice is here :)
I can provide pictures if needed, thanks for reading.
hot 80s makeup tutorial. madonna
QuietFlowsTheDon
04-16 05:09 PM
flower mound is a pretty good place.
good schools, home prices are a little better than nearby irving/valley ranch/coppell. property taxes are lesser than that in most other DFW suburbs.
pm me for any other info you would need.
I am willing to move to Flower Mound, TX. Any info will be greatly appreciated!
good schools, home prices are a little better than nearby irving/valley ranch/coppell. property taxes are lesser than that in most other DFW suburbs.
pm me for any other info you would need.
I am willing to move to Flower Mound, TX. Any info will be greatly appreciated!
more...
house 80s makeup tutorial. Cat Eye Makeup Tutorial. Cat Eye Makeup Tutorial.
vvincent72
08-16 04:59 PM
As per me, you really have to do "nothing"
1. You continue working with your present employer
2. Let the contract company get your H1B approved
3. After getting the new H1b Approval tell the contracting company that you will not join till 3 months as you are working on some important project, and able to join them ASA the project is complete
4. Wait for 6 months
5. After 6 months you will get EAD.
I did somewhat the same as above and it did work, a contracting company applied for my H1B but didn't join them for some technical reasons
The best part of this is you will get a CAP exempt H1B, which you can use it, if you run in trouble with your I-485
Thanks for your reply guys.! Looks like the bottom line you guys state is that - does not matter if the H1B is not withdrawn before Oct. 1st 2007 by the contracting company. It should not be a big deal to me when and how they withdraw this right.?
All that i may need from the employer is the letter they write to USCIS stating to cancel this petition. Do i have to keep a copy of the fedex receipt that they may use to send this out to USCIS. Just evidence that USCIS recd. this package.! Since USCIS will not send anything back that they actually withdrew this petiton what kind of proof / evidence do i need to keep with me for furture reference.?
Does this hanging I-129 petition affect the 485 / EAD that we have filed.?
Thank you!
1. You continue working with your present employer
2. Let the contract company get your H1B approved
3. After getting the new H1b Approval tell the contracting company that you will not join till 3 months as you are working on some important project, and able to join them ASA the project is complete
4. Wait for 6 months
5. After 6 months you will get EAD.
I did somewhat the same as above and it did work, a contracting company applied for my H1B but didn't join them for some technical reasons
The best part of this is you will get a CAP exempt H1B, which you can use it, if you run in trouble with your I-485
Thanks for your reply guys.! Looks like the bottom line you guys state is that - does not matter if the H1B is not withdrawn before Oct. 1st 2007 by the contracting company. It should not be a big deal to me when and how they withdraw this right.?
All that i may need from the employer is the letter they write to USCIS stating to cancel this petition. Do i have to keep a copy of the fedex receipt that they may use to send this out to USCIS. Just evidence that USCIS recd. this package.! Since USCIS will not send anything back that they actually withdrew this petiton what kind of proof / evidence do i need to keep with me for furture reference.?
Does this hanging I-129 petition affect the 485 / EAD that we have filed.?
Thank you!
tattoo 80s-inspired Magic Makeup
BPforGC
05-21 04:54 PM
July 2009
July 2010
July 2011
July 2012...or
By the way things are moving backwards, We will be awarded GC posthumously in a Rose Garden Ceremony by the President (who will be my son since he was born here and eligible to be come President. He will be contesting elections in 2060 under 'American Nava Nirman Sena' Ticket).
July 2010
July 2011
July 2012...or
By the way things are moving backwards, We will be awarded GC posthumously in a Rose Garden Ceremony by the President (who will be my son since he was born here and eligible to be come President. He will be contesting elections in 2060 under 'American Nava Nirman Sena' Ticket).
more...
pictures pictures 80s Makeup Tutorial
hiralal
05-10 07:39 AM
since there are so many threads discussing what we can and should do ..I thought that I would open this thread ..my red dots should send a signal that this is a serious issue. if USCIS were to act like this next year too ..then EB3 will become unavailable in march 2010 and EB2 will retrogress in june 2010 ..in other words HISTORY WILL REPEAT ITSELF ..so lets do something now (in addtion to helping IV) !!!
dresses hot Ifslip makeup tutorial,
psk79
05-30 12:29 AM
From my attorney and my understanding, say u have h1 and u started using ead.. later on u still have the unexpired h1b and u wanted to go back to h1 from ead, then all u do is go out of the country and go for visa stamping using ur h1 approval notice. Then you wil enter the country in h1b with a new i94 at POE. Then u are all set...
Say ur visa stamp in ur passport hasn't expired, then they said you could do an amendment or some change in ur h1b and get it approved. this iwll come iwht a new I94 and u wil hten b in h1b...Otherwise, u go out of the country and enter back showing h1b approval and get a new I94 at POE that will say h1b...
Hope that helps...
Say ur visa stamp in ur passport hasn't expired, then they said you could do an amendment or some change in ur h1b and get it approved. this iwll come iwht a new I94 and u wil hten b in h1b...Otherwise, u go out of the country and enter back showing h1b approval and get a new I94 at POE that will say h1b...
Hope that helps...
more...
makeup 80s makeup tutorial.
eastindia
05-14 02:19 PM
It is a very sad story. We people who have legal status feel very very lucky after reading his story. We can only imagine what this poor kid was going tough mentally. He did not have the right to education in college, could not drive and could not pursue his interests. He could not even go back to his country because he did not know anything else other than USA.
These kids deserve a better life than constantly living a life of fear and hopelessness.
These kids deserve a better life than constantly living a life of fear and hopelessness.
girlfriend Dirty dishes, 80s makeup,
GC_ASP
07-20 07:39 AM
If u r not married, its better to change the job using H1b transfer and use Ac21portability to continue the GC process ( new job should be similar). You don't have to use EAD. Once you start using ur EAD, you loose ur H1B status automatically and it would be hard to bring your wife on H4.
Here are the answers for ur three questions.
1. Your 485 will be in good standing as long as you change the job after 180 days of 485 receipt. You don't need any support from your ex-employer. But make sure your I-140 is approved before you leave and try to get the copy of it. If you leave before 140 approval, employer can revoke it and then your 485 will be denied. So chage the job after 180 days of 485 receipt using H1b transfer. (When using Ac21 portabilty you can inform USCIS proactively or wait for the RFE.) Don't use EAD if you are not married.
2. I think you can get H1B extension using 140 approval.
3.Yes, your wife can file the 485 when the PD is current. Her H1b doesn't have any effect on this.
I hope I answered the all your questions.
one misconception in the immigration community is that you need to use AC21 and EAD to change the job. This is not true. You don't have to use EAD to change the job. People use EAD just to avoid H1b transfer and other stuff.
Never use AP if you are unmarried.
This information is based on my research on this issue. For more accurate info, please contact the attorney!!!!
Here are the answers for ur three questions.
1. Your 485 will be in good standing as long as you change the job after 180 days of 485 receipt. You don't need any support from your ex-employer. But make sure your I-140 is approved before you leave and try to get the copy of it. If you leave before 140 approval, employer can revoke it and then your 485 will be denied. So chage the job after 180 days of 485 receipt using H1b transfer. (When using Ac21 portabilty you can inform USCIS proactively or wait for the RFE.) Don't use EAD if you are not married.
2. I think you can get H1B extension using 140 approval.
3.Yes, your wife can file the 485 when the PD is current. Her H1b doesn't have any effect on this.
I hope I answered the all your questions.
one misconception in the immigration community is that you need to use AC21 and EAD to change the job. This is not true. You don't have to use EAD to change the job. People use EAD just to avoid H1b transfer and other stuff.
Never use AP if you are unmarried.
This information is based on my research on this issue. For more accurate info, please contact the attorney!!!!
hairstyles dresses madonna 80s makeup.
Scythe
10-29 07:57 PM
Well you put tables in houses... so why not put them in websites?
(Going with the given assumption that websites inherit from houses somehow.)
(Going with the given assumption that websites inherit from houses somehow.)
perm2gc
07-17 06:55 PM
Friends. you have today witnessed what our collective strength can do and it is time that we spread a word about immigration voice and encourage your friends and families to join as a gratitude to IV .Please don't forget that the root cause of the problems still exist and we have to achieve it.
unit
09-16 04:17 PM
GCProbs,
Could you EDIT the title of this thread from "Need an advise" to "May not work for my GC sponsoring company" (or something similar) so that we can hear more from others who are in the same boat?
thanks.
Could you EDIT the title of this thread from "Need an advise" to "May not work for my GC sponsoring company" (or something similar) so that we can hear more from others who are in the same boat?
thanks.
0 comments:
Post a Comment